The samples at Thornleigh looked great and it seems as though they are doing plenty of variations on them. Looking forward to seeing further information on them.
Artwork for BDY and related wagons added to facebook
Right, then. I wasted some time, did some research and went from knowing nothing about such things to knowing very little.Will any of the Strath kits be more suitable? Not sure what an AMRZ looks like (old codes?) However Strath make brass kits for at least 4 AN vehicles and another 6 or more VR and NSW Car Carriers.
The ALX/VMBX versions would be the models required as the basis for an AMRZ (those AMRZ that I have seen, anyway). Unfortunately all of the ALX/VMBX models are being produced with fully sheeted sides.
Converting a flute-metal sided ALX/VMBX model would involve:
• disassembling the model
• VERY carefully removing most of the side sheeting including where it is moulded onto the back of the diagonal framing,
• filing the lower and upper decks flat and adding different tyre guides,
• bogie replacement,
• the addition of screen sides and their framing,
• the addition of lots of little wheel bracket holders.
Given how difficult it will be to remove the side sheeting from the framing and how much of the model will need to be discarded I think that a scratch build may very well be a better option.
I don't need any car carriers, but can't wait for Auscision to make an announcement on the road cars to go with them.I would guess they would only be doing a late 70s/80s Ford and Holden that will suit their car carriers, it would be expensive to tool cars and that's why there arnt many out there, if they were cheap why hasn't everybody already produced 1/87 cars.
Obviously they'll do makes of that era, but I hope to God they also produced later model road cars too!
I've mentioned it here before, but I still find it amazing that the latest Australian car one can get for their layout is the bevan Car of the Year, namely a 1988 VN Commodore!
Here's hoping we see a spread of Falcons some EF/EL, AU, BA and FG's; same with Commodores such as VT, VZ, VE etc. Utes and wagons would be good too!
I would guess they would only be doing a late 70s/80s Ford and Holden that will suit their car carriers, it would be expensive to tool cars and that's why there arnt many out there, if they were cheap why hasn't everybody already produced 1/87 cars.In many respects the major period for car transport was in the 60's & into the 70's at least on the south as there was at least 2 per day each way. Prior to the SG through to Melbourne cars were transhipped at Albury onto flat wagons, bodies were sent in open wagons.
You can not charge much for them when you need 8 per wagon so design has to be common to keep costs down. I do not think there would be that many modern modellers out there that would want for example a VE commodore to plonk on their layout.
If we take the overseas experience most stuff is based on the transition era 50s-60s cars and structures, even here in Australia it is always the original as released versions of diesel locos that sell out. That's where the biggest market is and that's what the Manufacturers target.
Awesome to see Auscision do the NODY and all it variants, these wagons are essential for anyone who wants to model a steel train that has run in the last 30 plus years, its going to be a very expensive 6 months me.
I was thinking 70s/80s as that covers both 3 and 4 letter codes.Just noticing that Auscision sell car interiors and loads at about $20 (probably a price rise due?)
There are already generic plastic blobs in red yellow and blue colours you can get from Athearn or someone like that.
Auscision tend to do detailed models so I don't see them doing a Generic car. I think they will be specific models. Maybe for Example XD falcon 1979-82 which I think had the highest build number for a falcon model ever in Australia (nearly 200 000 cars produced).
With the wagons they are producing the Ford train could be modelled that was a block train from Melbourne to Cooks River.
Very true many makes of cars over the years were transported including Crysler,Leyland,Datsun,Nissan,Toyota,Ford,Holden,Mitsubishi,VW ect.
Will be interesting to see what they end up producing.
Will any of the Strath kits be more suitable? Not sure what an AMRZ looks like (old codes?)I'm pretty sure that the AMRZ were once AMBP (as per the Strath kit pictured). The Strath kit should be spot on except for the required addition of the mesh sides and associated framing. The mesh would be difficult, but perhaps not impossible, to model convincingly. I believe that the Strath kits are very well done but I have yet to part with the money 'cos I just know that an RTR model will be announced as soon as I do. However, if Strath were to depict a current day AMRZ with no additions required by me then I would buy a couple because I think such a model would perhaps be beyond the capabilities of mass production RTR.
Of course enough hints are out there to suggest the missing models are being done by another producer.
Here is a Robert Wilson picture that arrived in my email today. Trust Robert to come up with something that was on my mind
Taken in 1977 0n October 29 with C505 running an Adelaide Jet.
This is what the older modellers are remembering how the car carriers were utilized in those days.
Notice how the colours and the body styles are randomised. How they sit almost bumper to bumper.
Who remembers vinyl roofs? Two tone paint and the very first metallic paints that started to emerge , but only on Premier's and Fairmont's.
Thanks for the photo Bob
Maybe on Holden Premiers but Fords had metallic paint in the normal Falcon range from 1964 XM , i know this because i own one
What ever happened to the Auscision Steam Engine hint several months back? Was it just a smoke screen?Rod,
All I heard was that it might have been a VR engine, possibly a D3 or A2? But the D3 is from another so as strong rumours persist the A2 is being done and its not supposed to be the long winded Eureka one
So the question is do we think Auscision intend adding steam into their mix?
Do you all know Sergeant Small? Lyrics are here: http://http://www.metrolyrics.com/sergeant-small-lyrics-weddings-parties-anything.htmlHey John,
Along those lines:
I wish I was about 30 year old and just a millionaire,
I would contact those buggers Pete 'n Jason and order a forty five.
Apologies. Not very good doggerel, but I'm too old and too poor to start in O gauge.
I was assuming that Auscision might engage in the C38 as its O Gauge project was out there - made sense to follow suit. And that the Eureka project had such a luke-warm reception and the big delays for a rerun ex the factory - the makings were all there for a trump release.....For me doing a proper 38cl is a no brainer & after the release of the Eureka models it made just as much sense, it is no different.
Also there seems to be a pattern with the 49/45 already done in O that it might be more likely....
Oh well - just see what happens.
Also need to know when that V Set order sheet will be out - looks like they are expecting a JUL16 release.
Subscribers: a6et, andrewstrains, Baggi, bevans, BOLIVIA, br30453, Btone, Captain Underpants, Clapham Junction, comtrain, CraigW, davesvline, Dman66, Draffa, Duffy, gortonsteam, Greensleeves, Ian Anther, Jack Le Lievre, james13, JLB51, KRviator, Lambing Flat, linton78, meh, Moses Wong, N463, Newcastle Express, NSWGR1855, NSWGRules, QR-INTERAIL, qredge, R719, railmod, raymond, RobertBrooker, RocketRod, SAR523, Shazam75, sm-at-eden, snerd, speedemon08, Sydney Yard, T777, TC_OFF, TedFreeman, Teditor, TheMeddlingMonk, Toad Montgomery, Trainguy01, trainsguy, trawny, wolfpac, yesbenno