Response to Austrains' announcement of a C30 tank and C30T
An Announcement from Austrains - SDS acquisition
Connecting loco and tender - Hornby Top Tips
Trainorama 830 class 847 review
Under the Portuguese Sun - Tree planting
Bachmann new GWR Earl Class review
Reconnecting with a childhood hobby
James May urges nation to 'save Hornby' as shares plunge 62%
Hornby boss quits after third profit warning in five months
Statement from Ixion Model Railways Ltd
How I made some coal bins, I was faced with the prospect of installing them at the stations on the Peckforton Light Railway. Whilst there was very little space at Bickerton, Bulkeley and Peckforton for any detailing beyond the bins themselves, .......
The bins at Peckforton Station
.... there was more scope for additional features to be added at the recently created goods yard at Beeston Castle (see Progress Report 74). I have already documented the development of the coal yard at Beeston Market station (see How I made some coal bins and Detailing the approach to the station and Progress Report 59).
Having created a small amount of additional space at Beeston Castle .....
...... I set about making a simple coal office (basically a shed) and added a few additional details such as a set of coal scales and other associated clutter.
The coal merchant's officeThe structure for the office was mostly made from one A3 sheet of 3mm thick PVC foamboard purchased online from Simply Plastics. I needed an extra piece of 3mm foamboard to finish off the roof - which came from my stock of off-cuts.
The dimensions for the office were - sides = 192mm x 96mm; ends = 160mm x 96mm (128m to peak of gable); the roof panels were 200mm x 95mm. The door was 40mm x 102mm and the window in the centre of one side was 64mm x 40mm. Horizontal planking was marked at 6mm intervals along the sides and ends, with vertical planks on the door at 5mm intervals.
The horizontal plank divisions were then scored ......
.... with a flat bladed screwdriver .....
......... and weatherboarding simulated by dragging the 6mm wide blade of a screwdriver along the scribed lines at an angle.
Wood grain was represented by dragging the teeth of a razor saw along each plank.
a 3mm wide strip was left at each corner of the end pieces. This was given vertical wood grain with the teeth of the razor saw.
The window frame was made from 2mm x 2mm strips of plasticard (cut from a 2mm thick piece of plasticard) glued in place with thick superglue (I use VitalBond, available in 50g bottles from eBay).
The walls and roof of the office were then glued together with thick superglue. The ends butting on to the sides to give a 3mm square pillar in each corner. 8mm wide eaves were glued to the gable ends, using 1.5mm thick plasticard. A 3mm wide sill was glued beneath the window and a 3mm wide rainstrip was glued above the door. These were cut from a 2mm thick piece of plasticard. The structure was then given a coat of red oxide primer and left to dry.
The interiorAlthough it will hardly be visible, I decided to add some interior detailing. A base for the office was cut from a piece of 2mm thick plasticard to fit snugly inside the building. At the midpoint, the base for the counter was made from 2mm thick plasticard. This was 40mm high and 35mm wide.
The counter top was then glued on to stretch across the width of the office (assuming there would be a lift-up flap at the end).
A 15mm deep bookshelf was made to fit across the back of the office, with shelves at 20mm intervals.
Stacks of box-files for the shelves were made from 16mm x 8mm pieces of 5mm and 3mm thick foamboard. These were glued together in stacks with superglue.
The drawers for a desk were scored on to a 35mm x 20mm piece of 2mm thick plasticard. Drawer handles were made from mapping pins superglued into holes drilled into the centre of each drawer, the shank of the pin then being snipped off at the back.
The structure for the desk was then made from pieces of 2mm thick plasticard, to fit into the space between the counter and the bookcase.
A chair was made from scraps of 2mm thick plasticard (1.5mm thick for the seat and backrests). The rear legs were 48mm x 3mm (with a 3mm indent in the middle) and the from legs 24mm x 3mm.The seat was 20mm x 20mm.
The rear legs were glued to the seat first with solvent adhesive. The backrest and lower strut were then glued into place.
The struts linking the rear and front legs were then glued .....
...... and then the front legs glued on.
It was then left for the glue to harden.
The interior was then given a coat of red oxide primer. Note, the underside of the base was also given a coat of primer to help prevent it from warping.
The floor and furniture was painted with varying shades of brown acrylics and the box files were painted with acrylics in various appropriate colours and white labels painted on. The log book was made from a square of 2mm thick plasticard, glued to a square of 0.5mm thick black plasticard.
A seated figure was painted and glued to the chair which was then glued in front of the desk.
The outside of the office was given a coat of green acrylic paint and the roof painted mid-grey. The window and eaves were painted cream.
The intended site for the office and coal bins was cast in concrete and, while the concrete was still in its 'green' state, a depression for the structures was hollowed out with a trowel.
A piece of Corriflute (also called Correx) was cut to fit the site ......
..... and given a coat of red oxide primer on both sides.
The office and some large barrels (of paraffin and fuel oils) was then glued to the corriflute.
The site was then sprinkled with coarse sand and sieved potting grit, before being soaked in SBR adhesive. Once this had set (after a couple of days), the site was flooded with a wash of black and brown cement dyes to tone down the 'newness' of the ground cover
Various other details were then added:
The name for the coal merchant (William France) was taken from the 1911 census returns for Beeston. William's father was the coal merchant in 1911 and his son (then aged 21) was his assistant. I have assumed William will have continued the business in 1932, provided he was fortunate enough to survive World War I.
I will leave the office etc. out over the summer but will bring it in during the winter months). I have no concerns about the durability of PVC foamboard and its ability to withstand the weather, but I do not want to have to repaint the building each year.
The detailing at Beeston Castle station is now more or less complete. The brewery building has been added to the other siding (see How I constructed the brewery - pending) and the castle ruins have been upgraded (see How I constructed Beeston Castle). The cattle dock was moved from the old siding and repositioned in the new siding (see How I cast some loading docks). Whereas, previously, goods traffic to and from Beeston Castle was minimal (the siding could hold only three wagons), it will now feature more prominently in daily freight movements. The weightings for wagons in my home-grown computerised freight management program has been modified to ensure the level of traffic will increase. I look forward to shunting stock in and out of the sidings and such movements will no doubt feature in my next video.
I am gradually adding more detailing such as this to my railway - but with five stations and station yards to contend with, it is a slow and steady process. However, it is also very enjoyable to see each station gradually become more alive.
This article first appeared on riksrailway.blogspot.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2019 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.