Hitachi's UK plant looks to the world market
Sliding seats could enable passenger trains to carry goods
A1 No 60163 Tornado does 100mph
Rail Alliance drives Midlands Engine
GB Railfreight to implement Ideagen safety software
UAV survey company Bridgeway Aerial takes off
Fire at Euston Station causes nationwide rail disruption
DB Cargo UK confirms job cuts and reform
Subsea cable fault detection demonstrated to rail industry
HS2 rolling stock procurement moves forward
Handing back the railway to passenger services at a higher speed is a top priority for our engineers.
In recent months we have made greater strides in reopening the railway at higher speeds following essential track renewals - and it’s all thanks to advances in engineering.
We carry out track renewals throughout the year to keep the railway safe and reliable for trains. We couldn’t run the railway without replacing life-expired infrastructure, but these upgrades have historically required trains to run at temporary speed restrictions of 50mph immediately after, causing delays for passengers.
What’s a temporary speed restriction?
We apply temporary speed restrictions after significant changes or upgrades to the track infrastructure to safely manage the passage of trains following intrusive track works (renewal of rail, sleepers and ballast). We generally keep the restrictions in place for one week.
Consolidation of the new ballast is key to ensure the new track is laid upon a solid foundation to prevent dynamic movement during normal running of trains.
Track renewals on the Brighton Main Line
We have designed our engineering assurance process to focus on the installation quality to prove we can open the track at a higher speed and reduce the impact on the passengers.
In addition to the engineering monitoring requirements, we remove all temporary joints during the core weekend works because temporary joints only allow trains to run at 50mph.
Our strategy has been to focus first on removing the speed restrictions that have had the highest impact on passenger services.
On our Wessex route in recent weeks, we have cut the total number of temporary speed restrictions - planned and emergency temporary speed restrictions - from a high of 73 in September to just 30 in May, allowing trains to run at 80mph.
It follows even greater success during our Christmas season upgrades - on 28 December, the line at Milton Keynes Central returned to use by train operators at 125mph in our 100th high-speed handback of 2018.
Click on the gallery to see some of our track renewals
How are we enabling faster handbacks?
Our engineers have a continuous improvement programme, which includes targets to return the railway to train operators at higher speeds.
We have been developing techniques to achieve this for passenger services over the past few years.
Crucial to this are various techniques to fully consolidate the track during construction. Dynamic track stabilisers are now regularly used during approximately eight-hour slots within the core works to consolidate the ballast through means of high-frequency vibration, mimicking weeks of passenger trains passing over the track and achieving the required consolidation.
Traditional temporary plated jointed systems, which we ordinarily use until we can fully weld the track, are only fit for services running up to 50mph so we have introduced higher speed plated joints to our list of solutions. Where we can, we like to fully weld and stress the track during the core shift, which also enables high-speed handbacks.
We use machinery guided by 3D/GPS technology to control the excavation, ballast and track installation to provide a quality product as per the design.
Doing this means we can safely allow faster trains to run over the track. Higher speed handbacks are also good for the environment because trains do not have to use energy to brake and then accelerate again.
George Murrell, a programme manager for Infrastructure Projects at Network Rail, said: “If we don’t deliver this, there could be a longer temporary speed restriction. That’s why we need to get it right, first time, every time.”
We use high-output machinery for track renewals covering longer stretches of the railway. See it in action...
The post How we’re improving journeys through fewer speed restrictions appeared first on Network Rail.
This article first appeared on www.networkrail.co.uk
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2019 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.