Perth train passengers most satisfied rail commuters in Australia: survey
Rail sounds spectator safety alert
Hunter workers in running to build new train fleet
Rail access deal on arbitration track
Manage grain on rail issue: WAFarmers
Growers fear January rail access issues
West Australian rail network operator says state government investment needed to reopen Tier 3 rail freight lines
FMG mulls railway expansion
Western Australia needs a state-wide infrastructure plan to support mining and resources growth, says peak industry body
Historic Golden Mile Loopline Railway from Kalgoorlie to Boulder in WA Goldfields set to live again
The EDI Rail Bombardier Transportation joint venture has delivered the last of 78 B-Series electric multiple-units ordered by Western Australia’s Public Transport Authority, 15 years after the first was unveiled. The final unit is expected to enter service on the Joondalup and Mandurah lines in early July.
An initial 31 three-car B-Series units entered traffic from September 2004. PTA then exercised an A$157m option for a further 15 in 2006, followed by orders for 17 and then five units in 2012 and an order for a final 10 in 2016.
The 1 067 mm gauge 25 kV 50 Hz EMUs with a maximum speed of 130 km/h were designed by Bombardier in Australia. They were manufactured at Downer’s facility at Maryborough in Queensland, with electrical pre-assembly work undertaken by Bombardier at Dandenong in Victoria.
The joint venture will continue to provide fleet maintenance services under a contract running until 2026.
Meanwhile, procurement of the C-Series fleet is underway, with Alstom, the Momentum West consortium of CAF and UGL and the EDI Rail Bombardier JV shortlisted. The contract worth an estimated A$1·6bn would cover the supply of 17 six-car sets for the Metronet rail expansion programme, and 24 six-car units to replace the ageing A-Series which were the first EMUs on the Transperth network.
Deliveries are scheduled to start in 2021. The C-Series EMUs would have a capacity of about 1 200 passengers, wider doors for faster boarding, USB charging ports, LED lighting and regenerative braking. The contract would require 50% of the fleet to be assembled in Western Australia, and is to include up to 30 years of maintenance.
This article first appeared on www.railwaygazette.com
About this website
Railpage version 3.10.0.0037
You can syndicate our news using one of the RSS feeds.