Perth train passengers most satisfied rail commuters in Australia: survey
Rail sounds spectator safety alert
Hunter workers in running to build new train fleet
Rail access deal on arbitration track
Manage grain on rail issue: WAFarmers
Growers fear January rail access issues
West Australian rail network operator says state government investment needed to reopen Tier 3 rail freight lines
FMG mulls railway expansion
Western Australia needs a state-wide infrastructure plan to support mining and resources growth, says peak industry body
Historic Golden Mile Loopline Railway from Kalgoorlie to Boulder in WA Goldfields set to live again
The Australian Transport Safety Bureau (ATSB) has found there were several issues which led to the derailment of a BHP ore train in WA's Pilbara, including how a rail gang had started locking down the wrong train.
The fully-laden runaway train was deliberately derailed early on November 5 last year about 120 kilometres south of Port Hedland.
The train had taken off while its driver was out of the cabin, travelling more than 90km before being derailed by workers at BHP's Integrated Remote Operations Centre in Perth, about 1,500km away.
A report by the ATSB said a rail gang was sent to help the driver after the ore train came to a stop with a disconnected cable, but they mistakenly went to another train on an adjacent track.
As the gang started applying handbrakes to cars on the wrong train, the one they were supposed to be working on started rolling away.
Two locomotives were destroyed in the subsequent derailment, along with 245 ore cars and two kilometres of track.
But BHP has said even if the maintenance team had made it to the right train, they would not have been able to stop it from moving away because an emergency brake in the lead locomotive had not been properly applied.
The details about the failed efforts to assist ore train M02712 have been included in the ATSB's preliminary report into the derailment — the first account of the disaster by an independent investigative body.
BHP has said the sequence of events laid out by the ATSB was "in line with our own findings".
Automated brake brought train to haltThe loaded ore train, consisting of 268 cars and four locomotives, was on its way from Newman to Port Hedland when, at 3:39am, communication "between the lead locomotive and the combined end of train monitor was lost".
This triggered an automated emergency brake and the train came to a stop 210km from Port Hedland.
The train driver made an emergency call to Hedland train control, with the controller blocking signals on the adjacent east track to protect the train from other rail movements and alerting maintenance gang personnel.
The driver was advised that handbrakes needed to be applied on the 268 ore cars, and he started doing so from the front of the train with the expectation the gang would start from the back.
He had applied a brake in the cabin, but this affected only the locomotive itself rather than the entire train.
The driver then started on the car brakes only minutes before 4:00am.
At about the same time, an empty ore train M02727 had stopped on the adjacent east track at a spot named Garden South.
Car brakes applied to wrong trainThe maintenance team advised that they had arrived to start applying handbrakes from the back of the train and apparently did so, not knowing they were working on the wrong one.
But at 4:40am, the driver noticed the train moving forward, so he called the maintenance gang but received no response.
The driver of the empty train, M02727, contacted controllers and said he had seen M02712 passing his location at about 50 kph "with brakes dragging".
As M02712 gathered speed, other drivers were told to leave their trains and get off the line to a safe place.
The runaway convoy reached speeds of more than 160 kph before slowing on rising grades, and was derailed just before 5:30am at a speed of 144 kph.
The front two locomotives remained on the track, as did the first ore car and the last 22 cars.
Everything in between went off the rails.
The driver of the empty train told Hedland control that "the Redmont gang had mistakenly applied handbrakes to his train rather than to train M02712".
It is understood the gang had only been at the wrong train for a matter of minutes.
Before M02712 had rolled, the driver had applied handbrakes to 73 cars.
BHP sacked the runaway train driver before Christmas, but he launched an unfair dismissal claim and has since agreed to a settlement with the mining giant.
This article first appeared on www.abc.net.au
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2020 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.