Hitachi's UK plant looks to the world market
Sliding seats could enable passenger trains to carry goods
A1 No 60163 Tornado does 100mph
Rail Alliance drives Midlands Engine
GB Railfreight to implement Ideagen safety software
UAV survey company Bridgeway Aerial takes off
Fire at Euston Station causes nationwide rail disruption
DB Cargo UK confirms job cuts and reform
Subsea cable fault detection demonstrated to rail industry
HS2 rolling stock procurement moves forward
Last September, a Jubilee line train was driven at over 60km/h between two stations with its doors open in several carriages, a report from the Rail Accident investigation has found.
An investigation by the Rail Accident Investigation Branch (RAIB) has not come to a conclusive decision about how the incident occured, but says that it was likely due to a mix of poor staff training and tiredness in the driver.
The driver, who has not been named, had been operating trains on the Jubilee line since December 2007, having joined London Underground as a station assistant in 1999. His most recent driving assessment before the incident was in July 2018 as part of his regular competence management cycle, and no problems were reported.
The incident took place on Saturday 1st September 2018 at 9am as the train arrived at Finchley Road station northbound under automatic train operation (ATO), and the doors opened without the driver pressing the necessary switch.
That was enough to indicate a problem with the train, and it might have been prudent to take it out of service. The OTDR, or “black box” then recorded all the actions taken by the driver to fix the problem.
It seems that while dealing with the door issue, the train operator operated a switch, bypassing the door interlock circuit that was intended to prevent the train departing with doors open. Other trains would sound an alarm, but the Jubilee line trains didn’t. He then drive off to West Hampstead, unaware that the train had 10 doors still open.
During the trip, a passenger alarm was triggered, and when the driver discovered the problem, the train was taken out of service for investigation. Fortunately, the train was lightly used on a Saturday morning, and no one was hurt in the incident.
In the subsequent investigation, the driver said that he had ‘zoned out’ and made ‘rushed decisions’ when dealing with the door problems at Finchley Road.
The report by the RAIB suggests that the switching from automatic train operation at Finchely Road station along with the fault developing probably caused a sudden increase in the drivers workload, and that he might have been tired from his sleep pattern as he had just 6 hours sleep the night before, or lack of food as he hadn’t eaten for 13 hours.
Hence his not noticing the problem when leaving Finchely Road station.
The RAIB has made four recommendations addressed to London Underground. These include improvements to door control systems on Jubilee line trains; better training to help train operators respond correctly when sudden increases in workload occur while operating trains in automatic mode; raising train operator awareness of the adverse effects on safety from insufficient sleep and inappropriate eating patterns; and improved management of train faults.
The reason that the report doesn’t absolutely lay the blame at any one person or issue is that RAIB investigations don’t point the blame or liability, as it’s investigations are there to solely prevent future problems.
London Underground has now given its train drivers additional training on how to operate trains during unusual faults.
This article first appeared on www.ianvisits.co.uk
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2019 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.