Response to Austrains' announcement of a C30 tank and C30T
An Announcement from Austrains - SDS acquisition
Connecting loco and tender - Hornby Top Tips
Trainorama 830 class 847 review
Under the Portuguese Sun - Tree planting
Bachmann new GWR Earl Class review
Reconnecting with a childhood hobby
James May urges nation to 'save Hornby' as shares plunge 62%
Hornby boss quits after third profit warning in five months
Statement from Ixion Model Railways Ltd
Over the years, a number of people have been kind enough to share with me copies of prototype waybills in their possession. By far the most extensive of these have been bills from the collection of Andy Laurent, and I am grateful to Andy for his generosity in sharing these. This post gives examples of two interesting waybills. Incidentally, if you would like to examine earlier posts in this series, the simplest way to find them is to use “waybills part” as the search term in the search box at right. To begin, let me show a waybill from a very small railroad, the Raritan River. It was a 20-mile railroad in and around South Amboy, New Jersey, and owned no freight cars in interchange service. It interchanged with both the Pennsylvania Railroad and the Central of New Jersey in South Amboy, and largely provided local switching service; in 1953, it listed 8 locomotives in service. Despite its small size, and unlike many small or switching roads, the Raritan River did issue waybills. This is an example from the Laurent collection; note that like so many bills, it’s creased down the center from conductors folding it. (You can click on the image to enlarge it if you wish.) Note several interesting things about this waybill. First, the load was shipped in a New York Central box car, no. 41192, a 50-foot single-door car of 50 tons capacity. The cargo is shown as a carload (C/L), and comprised calcium silicate and asbestos in flat sheets; and it is noted that the shipper counted and loaded the cargo (SC&L). The car was weighed at Parlin, New Jersey, with the weight is given as 72,700 pounds. Notice that the original freight charge has been corrected by hand. It was interchanged to the CNJ at South Amboy, and routed to Taylor, Pennsylvania for transfer to Erie Lackawanna. Via EL it went to East Buffalo, New York for interchange to C&O (Pere Marquette District) and taken to Ludington, Michigan for car ferry transportation across Lake Michigan to Kewaunee, Wisconsin and the Kewanuee, Green Bay and Western, and finally to the Ahnapee & Western for delivery to Algoma, Wisconsin.Here’s another waybill that was interesting, at least to me. It’s from the Oregon Electric Railway. The OE began operation in 1908 as a connection between Portland and Salem in Oregon’s Willamette Valley (as locals always say, “Willamette” rhymes with “dammit”). Only two years later, in 1910, it was purchased by the Spokane, Portland and Seattle, and the line was extended to Eugene in 1912. Though electric operations ended in 1945, the OE survived well after the BN merger, still as a wholly owned part of the BN system.Many railroads with such subsidiaries had the local agents use the big road’s waybills, but many did not. The OE is an example, as you see in the waybill below. This waybill illustrates a number of things. First, of course, is the OE header at the top. Second, the cargo of plywood from U.S. Plywood’s plant in Eugene, to the Algoma, Wisconsin Division of U.S. Plywood, is only shown as a carload (C/L), and the notation on the bill states “do not weigh,” in light of the Weight Agreement stamp (large round stamp at upper right). The load is being shipped in C&O 16186, a 50-foot double-door box car. Such a car is a free-runner, of course, and thus it’s not peculiar that a C&O car is being loaded in Eugene, Oregon.Routing is as follows: OE to Willbridge, Oregon, thence SP&S to Spokane and interchange to Northern Pacific. Then NP takes the car across its Northern Transcon to interchange with C&NW at Park Junction (Minneapolis), thence to the Green Bay & Western at Merrilan in central Wisconsin, then to Green Bay, and via the KGB&W and Ahnapee & Western to Algoma.Of course, as a modeler of the western U.S., I felt I really needed to have an OE waybill for use in layout operating sessions. This is simple to do, just graft the OE header seen above onto the standard AAR waybill form (admittedly not exactly the same as the OE form). Here’s how it looks in my model form when filled out (note the weight stamp is literally exactly the same, even the agreement number): I feel like I have learned a lot about how waybills looked and what information was used in filling them out, by examining a number of the bills Andy Laurent was kind enough to share with me. And I expect to continue to learn in the same way. Sometimes, as with the OE bill shown in this post, I even gain another model waybill, but the Raritan River feels just a little too remote for me — maybe I’ll wait and see if it grows on me . Tony Thompson
This article first appeared on modelingthesp.blogspot.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2021 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.