Response to Austrains' announcement of a C30 tank and C30T
An Announcement from Austrains - SDS acquisition
Connecting loco and tender - Hornby Top Tips
Trainorama 830 class 847 review
Under the Portuguese Sun - Tree planting
Bachmann new GWR Earl Class review
Reconnecting with a childhood hobby
James May urges nation to 'save Hornby' as shares plunge 62%
Hornby boss quits after third profit warning in five months
Statement from Ixion Model Railways Ltd
My next step in this project was to scratchbuild some chain link fence for the complex. I used an article in the March 2018 Model Railroader and a YouTube video by Luke Towan to learn how to do this.
I started by cutting 0.032 in music wire to the correct lengths, holding them together with Poster Tack.
I then soldered the joints. Flux is a must for this.
For the mesh material I used nylon tulle.
Here it is attached:
The one on the left was “painted” with a gray Sharpie, and the one on the right with a paint marker.
I installed these on the layout using brass tubing in the benchwork.
The next step is to make some more fence for the perimeter of the buildings. The gates are a little rough, but they only cost me around a dollar and a couple hours. -Harrison
This article first appeared on northcountrytrains.wordpress.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2021 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.