FreightWaves Classics/Infrastructure: 153rd anniversary of transcontinental railroad (Part 2)
Five new members appointed to the National Railway Museum’s Advisory Board
Denver History Still Lives ...If You Know Where To Look
FreightWaves Classics: The Atlantic Coast Line was one of several strong Southern railroads
Big Train Tours: The Museum’s Outdoor Garden Railroad
Non-Profit Inks Deal to Run Nickel Plate 765 on Indiana Northeastern
Railroad Uniforms and Accessories
Johnstown, PA: Bethlehem/Cambria Steel Franklin Works
FreightWaves Classics/Pioneers: Edward G. Budd transformed the railroad and automobile industries (Part 3)
1989 Crawfordsville, IN: Nucor Steel
Controversies and scandals
The transcontinental railroad project was not without controversy or corruption. Thomas C. Durant, a doctor turned businessman, bought over $2 million in shares of the Union Pacific Railroad Company, gaining control of the company and installing his own managers. Durant and other Union Pacific investors created a front company – the Crédit Moblier of America – that was presented as a separate business and independent contractor. It was “awarded” the contract to construct the railroad.
During the massive construction project, Crédit Moblier of America overcharged the federal government tens of millions of dollars. The company was paid by the number of miles of track laid, so the original route was lengthened whenever possible, costing taxpayers even more.
Soon after the Union Pacific’s completion, Durant’s corrupt business schemes erupted into a public scandal with Congress investigating not only Durant, but also fellow senators and representatives who had benefited from his shady dealings. Unfortunately, similar illegal and unethical schemes were part of the construction of the Central Pacific Railroad as well.
Workers lay Central Pacific Railroad track. (Photo: University of California Press)
The push to lay track (and earn money and land)
In July 1865, two months after the end of the Civil War and the assasination of Abraham Lincoln, the Union Pacific began to lay track westward at Omaha. Later, the Union Pacific built a bridge spanning the Missouri River to connect Omaha with Council Bluffs, the official eastern terminus of the railroad.
The Union Pacific and the Central Pacific were competing to see which could lay track the fastest (which meant greater revenue from the federal government as well as grants of rights-of-way). The Union Pacific hired tens of thousands of Civil War veterans to work on the railroad and because of its route had a ready supply of labor. Temporary, ramshackle settlements and “towns” trailed the Union Pacific. Similar to the settlements that grew around major mining claims, drinking, gambling, prostitution and violence were the main “products” of these settlements, and helped build the enduring mythology of the “Wild West.”
The Central Pacific had a more difficult time finding labor. It began by hiring men in the Northeast and paid to transport them to the West. But many did not stay on the job, lured by a silver strike in Nevada and other opportunities that proved easier than laying track in a difficult and harsh wilderness.
The Central Pacific then sought to hire newly freed African-Americans, Mexican immigrants and also sought to use Confederate Civil War prisoners. None of these options worked on a large-scale basis, so the Central Pacific turned to Chinese immigrants. Within three years of a trial of 50 Chinese workers, more than 80% (and some believe 90%) of those building the Central Pacific – some 15,000 – were Chinese.
Chinese laborers working on the Central Pacific Railroad.
(Painting by Jake Lee/Chinese Historical Society of America)
Work on both railroads was difficult and dangerous. As the Central Pacific moved eastward through the Sierra Nevada mountains, tunnelers used dynamite to loosen granite and then dug it out and hauled it by hand. Progress was won foot-by-foot through the mountains. In addition, the railroad had to span deep ravines, and work continued through winter blizzards and spring flooding.
While work on the Union Pacific was somewhat easier from the standpoint of geography, its workers faced attacks by Native American tribes who resisted the intrusion of the “iron horse” on their lands. Warriors of the Sioux, Cheyenne and Arapaho tribes raided railroad work parties that armed themselves against the attacks. The Union Pacific was also protected in part by the U.S. Army. Nonetheless, the raids by the Native Americans slowed work significantly as they attacked surveying parties, smaller work gangs, stole livestock and even managed at times to pull up track that had been laid, derailing locomotives and rolling stock.
The Central Pacific, moving ever-eastward, and the Union Pacific moving westward, sought to lay track as quickly as possible – after all, each mile of track meant additional land and revenue for the owners of the respective companies.
Despite having started nearly two years before the Union Pacific, the Central Pacific had only laid 100 miles of track by the end of 1867 because of the challenging terrain of the Sierra Nevada mountain range. However, after conquering the mountains, the Central Pacific was able to lay track at a swift pace across the state of Nevada. The railroad reached the border of Nevada and Utah Territory in 1868.
Concurrently, the Union Pacific had pushed westward through the Nebraska Territory (which became a state in 1867) and the Wyoming Territory. The railroad had generally followed the paths of the Oregon, Mormon and California Trails and had laid about four times as much track as its competitor.
Route of the first Transcontinental Railroad. The Central Pacific (red) laid track from Sacramento to Promontory Summit and the Union Pacific (blue) laid track from Omaha. (Original artwork: DanMS/subject to the GNU Free Documentation License)
Reaching the Utah Territory
Both companies were pushing forward with construction, heading toward the Great Salt Lake. In their rush to lay track (again, for government bonds and land), both railroad companies worried little about construction standards – and therefore built sub-par bridges or laid track that had to be rebuilt later. The two railroads rushed towards each other across the northern part of the Utah Territory; however, no specific “meeting point” had been established when President Lincoln signed the Pacific Railway Act in 1862.
Neither railroad company was willing to stop work and let the other railroad meet it. In March, President Ulysses S. Grant (who had only recently been inaugurated on March 4) announced he would withhold federal funds until the railroads agreed on a meeting point. On April 9, 1869, nearly seven years after the enabling legislation had been passed, the U.S. Congress set the junction of the two lines at Promontory Summit, north of the Great Salt Lake in Utah Territory. Promontory Summit was approximately 690 track-miles from Sacramento and 1,086 track-miles from Omaha.
At the Golden Spike ceremony, May 10, 1869. The Central Pacific’s locomotive Jupiter is in the foreground. (Photo: public domain)
Golden spikes at Promontory Summit
As noted above, just one month later, on May 10, 1869, locomotives of the Central Pacific and the Union Pacific’s engine faced each other at that point to signal the meeting of the two railroads. At 12:57 p.m. local time, the announcement was telegraphed of the completion of the transcontinental railroad. Celebrations took place across the country – from San Francisco on the West Coast to Washington, D.C.
Despite the corruption, deaths and injuries of countless laborers, environmental destruction (which, of course, was not a consideration in the 1860s) and the damage done to the hunting grounds and ways of life of numerous Native American tribes, the United States had a transcontinental route that united its two coasts. At the time, it was one of the world’s greatest engineering and construction feats.
Central Pacific Railroad and Union Pacific Railroad display advertisements carried in The Salt Lake Daily Telegraph the week that two lines’ rails were joined. (Source: The Cooper Collection of US Railroad History)
The legacy of the transcontinental railroad
It is likely that the impact of the transcontinental railroad cannot be fully understood in 2022. For the first time, the United States was truly united – tied together coast-to-coast by over 1,900 miles of steel rails; the primary transportation mode of the time.
What did this mean to Americans in 1869 and in the years afterward? The six-month trip by ship to California from Eastern ports had been reduced to two weeks or less by train. The cost to make the trip before the completion of the railroad was nearly $1,000 (the equivalent of more than $15,500 today). Once the transcontinental railroad was completed and passenger service began, the price dropped to $150 (about $2,300 today). Transporting freight and goods also became quicker and less expensive.
The Pacific Railway revolutionized the settlement and economy of the American West. The sparsely populated western states and territories were able to align with the states east of the Missouri River much faster than they would have without the railroad. The western states and territories changed in just a few decades from the “frontier” into a vast region in which towns and cities grew. The region generated agricultural, industrial and commercial production at an accelerated pace as the population of the country increased dramatically.
Destruction of the Native American way of life
The most negative impact of the transcontinental railroad was the impact on the Native Americans of the Great Plains. While difficult, the construction of the Union Pacific was much faster and easier than the construction of the Central Pacific. But when the Union Pacific reached Indian-held lands, the work became much more dangerous. Native Americans viewed the railroad as a violation of the treaties negotiated with the United States. Native American war parties fought many small battles along the route; the railroad and the U.S. Army fought back. But the Union Pacific turned the tide after it hired sharpshooters to slaughter the buffaloes that were the primary source of food and other necessities of the Plains Indians.
Gen. William Tecumseh Sherman’s first command after the Civil War was the vast territory west of the Mississippi River and east of the Rocky Mountains; his top priority was to protect the construction of the Union Pacific Railroad. He wrote Gen. Ulysses S. Grant (later President Grant) in 1867, “we are not going to let thieving, ragged Indians check and stop the progress” of the Union Pacific.
It is ironic that Abraham Lincoln, known for ending Black slavery in the United States, was also responsible for the railroad that destroyed much of Native American culture. (Engraving: Vaningen Snyder)
Gen. Philip Sheridan succeeded Sherman as commander of the U.S. Army in that vast region. According to historians he used “scorched earth” tactics, similar to those he utilized in the Shenandoah Valley during the Civil War. By decimating the buffalo population, the U.S. Army and the Union Pacific were able to defeat the Plains Indians.
The devastation of the buffalo population signaled the end of the Indian Wars, and Native Americans were pushed onto reservations. Sheridan later acknowledged the role of the railroad in changing the American West. In his 1878 annual report of the General of the U.S. Army, he wrote, “We took away their [the Plains Indians] country and their means of support, broke up their mode of living, their habits of life, introduced disease and decay among them, and it was for this and against this they made war. Could anyone expect less? Then, why wonder at Indian difficulties? ”
For all its many benefits, the transcontinental railroad effectively ended the traditional Native American way of life on the Great Plains.
Western railroads flourished after the Pacific Railway opened
The completion of the transcontinental railroad did not actually connect to either the Atlantic Ocean or Pacific Ocean but merely connected Omaha to Sacramento. A short time later, the Western Pacific Railroad Company’s 132 miles of track connected Sacramento to Oakland/Alameda on San Francisco Bay. Those travelers bound for San Francisco would then take a steamer across San Francisco Bay.
The Union Pacific did not connect Omaha to Council Bluffs until it completed the Union Pacific Missouri River Bridge in 1872. Existing railroads east of Council Bluffs connected the eastern terminus of the transcontinental railroad with the East (and the Atlantic Ocean).
The Central Pacific Railroad freight depot in Sacramento in 1866. (Photo: Alfred A. Hart/Stanford University Library)
The transcontinental railroad was only the beginning of the railroad building boom in the western half of the United States. Several railroads were built subsequently to connect it with other population centers in the various states and territories.
In 1869, the Kansas Pacific Railway began construction of a swing bridge across the Missouri River between Kansas City, Missouri and Kansas City, Kansas which connected railroads on both sides of the Missouri while also allowing passage of paddle steamers on the river. After completion of the bridge – the first bridge across that major river – this became another major east-west railroad.
The original transcontinental route had bypassed the two largest cities in the region – Denver and Salt Lake City. Feeder railroad lines were soon built to service these two and other cities and states along the route.
In order to hasten the completion of the Kansas Pacific Railroad to Denver, construction started in Denver in March 1870, moving east to meet the rail line being built west from Kansas City. The two lines met at Comanche Crossing, Kansas Territory, on August 15, 1870. With rail service, Denver was destined to become the largest city in Colorado and its future capital. The Kansas Pacific Railroad linked with the Denver Pacific Railway via Denver to Cheyenne in 1870.
In 1876, a “mere” 83 hours and 39 minutes after leaving Jersey City, New Jersey, the Transcontinental (Lightning) Express arrived in San Francisco via the first transcontinental railroad.
Traveling across the entire nation in less than four days was inconceivable to previous generations of Americans. (Illustration: Currier & Ives)
Kansas City’s head start in connecting to a true transcontinental railroad contributed to it rather than Omaha becoming the dominant rail center west of Chicago. The Kansas Pacific became part of the Union Pacific in 1880.
The Central Pacific Railroad finally had a direct route to San Francisco in 1885 when it merged with the Southern Pacific Railroad to create the Southern Pacific Company. In 1901 the Union Pacific took control of the Southern Pacific; however the U.S. Supreme Court forced it to divest the Southern Pacific because of monopoly issues. It took 95 years, but the railroads came together in 1996 when the Union Pacific purchased the Southern Pacific.
FreightWaves thanks the Linda Hall Library, History.com, Wikipedia and other sources for material that contributed to this article.
This article first appeared on www.freightwaves.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2022 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.