Jeff Willsie, Founder of Ontario Southland, Dies at 70
CN plans capital investments in Illinois, Tennessee, 2 Canada provinces
CN announces spending in British Columbia and Quebec
CN investing over $500M in British Columbia, Quebec
CN to invest more than $130M in Manitoba and Nova Scotia
Canadian National launches second train pair serving Port of Halifax
Draft Key Failure Caused CN Derailment: TSB
Canadian National resumes rail movement in flood-hit British Columbia
Via Rail cancels plans to resume full Montreal-Halifax service
CN allocates more than $800M for capital investments in Ontario, Alberta
These girders play a key role as they form the bridge that will allow Barrie GO trains to travel above the CP Rail tracks. A new time lapse video takes you behind the scenes for the impressive lift of the girders.
The Davenport Diamond Guideway project is reaching new heights with the installation of the first steel girders.
The girders were installed over a recent weekend as part of the construction of the CP Rail bridge.
For those not familiar with bridge construction, girders are large bridge segments that will support the track.
When it’s done, the bridge will eliminate the intersection where the Barrie GO tracks meets the CP tracks, allowing GO trains to travel above while CP freight trains pass underneath. This work supports GO Expansion for more frequent, all-day, two-way service on the Barrie Line.
The work took two full nights of work (Nov. 6-8) – about 20 hours total – to lift the CP bridge steel girders and beams into place.
Watch the time-lapse video to see the girder installation in action:
The two outside girders are the largest components of the bridge, at 30 metres in length. Each girder weighs more than 53,000 kg, which is about the same as 32 regular cars. It’s no surprise a 600 ton crane (545 tonnes) was the go-to machinery to position these.
In the early hours of Nov. 6, the installation began on the end beams and first girder. And by early morning on Nov. 8, the second girder was set in place, followed by the installation of intermediate floor beams and braces to complete the bridge structure.
Crews worked to get the job done safely, all while interruptions to GO train service were kept to a minimum. Substantial planning and collaboration between Metrolinx, its contractor Graham, and Canadian Pacific helped ensure this major lift was completed successfully.
While there is no GO train service overnight, CP trains run 24/7, which meant the operation was carefully managed to work with frequent CP freight trains passing directly through the work zone.
For now, GO trains will continue to travel on the diversion track, which was installed in 2020 to allow GO service to continue running during construction.
The diversion track was the first key stage of construction as it temporarily moves the existing GO rail track structure to the east of the current railway to allow space to construct the elevated guideway. To learn more about the diversion track, read about it in a past story here.
Once the west mainline track is installed, trains will be moved up top onto the elevated guideway, allowing crews to remove the diversion track and complete the remaining at-grade work required for the project.
For more information on the Davenport Diamond Guideway project and to get the latest updates, sign up for Toronto West weekly e-blasts here or follow @GOExpansion.
You can also connect with the Metrolinx community relations team at TorontoWest@metrolinx.com.
Read more articles on passenger rail.
The post Watch: Time-lapse video of Davenport Diamond Guideway project reaching major milestone appeared first on Railway Track and Structures.
This article first appeared on www.rtands.com
About this website
Railpage version 3.10.0.0037
All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest is © 2003-2022 Interactive Omnimedia Pty Ltd.
You can syndicate our news using one of the RSS feeds.